Protect bilge areas with solvent- and sludge-resistant BilgeKote Enamel.Bilgekote is a fast-drying, durable coating formulated for application to bilge areas. Bilgekote helps prevent absorption of oil, gasoline or sludge into wood and fiberglass. Additionally, Bilgekote can be used to protect lockers and bulkheads from moisture penetration.Key FeaturesResistant to chemicals, fuel, oil and fumesCleans easily for reduced maintenanceConsiderable application covering due to the paints high densityHard-wearing coating for bulkheads Physical DataType: One-part enamel Finish: Semi-glossAvailable Colors: Gray, White Components: 1Solids by Volume: 44%Coverage: 450sq.ft/gal.VOC: 414g/lApplicationApplication Method: Brush, roller, airless or conventional sprayNumber of Coats Recommended: 2-3 minimumWet Film Thickness/coat: 4.5 milsDry Film Thickness/coat: 2 milsApplication Temperature Min./Max. Range: Minimum 50F. and Maximum 95F.Thinner: Brushing Liquid 333, Model 117945 or Special Thinner 216, Model 117598Drying Times* (Hours) Drying @59F @73F @95F To recoat 3 hr. 2 hr. 1 hr. To launch 16 hr. 12 hr. 8 hr.